IKEA FRAMTID OV9 - Manual (Page 13)

What to do if…
Problem Possible cause Solution
The oven does not op-
erate
The required setting have not
been set
check if cooking function and
temperature are selected
The oven does not op-
erate
The appliance is not correctly
connected or/and the mains
supply to the oven is not on
Check if the appliance is correct-
ly connected and the mains sup-
ply to the oven is on
The temperature indi-
cator does not come on
The required setting have not
been set
Select the cooking function and
temperature
The oven lamp is not
working
The oven lamp bulb is faulty Replace the oven lamp bulb
Steam and condensa-
tion settle on the food
and in the oven cavity
Dishes have been left in the
oven for too long
Do not leave the dishes standing
in the oven for longer than 15-20
minutes after the cooking process
ends
“12.00” appears on the
display and the clock
LED is flashing
Interruption of the power sup-
ply.
Reset the time
F11 appears on the
display
The plug of the meat probe is
not firmly in position in the
socket
Insert the meat probe plug into
the socket in the side wall of the
oven as far as it can go
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a sol-
ution to the problem yourself, contact your
dealer or the After Sales Service.
If you operated the appliance wrongly,
or the installation was not carried out by
a registered engineer, the visit from the After
Sales Service technician or dealer may not
take place free of charge, even during the
warranty period.
Technical data
Dimensions (internal) Width
Height
Depth
395
335
400
Usable volumes 53 l
Area of largest baking sheet (net sur-
face)
1130 cm²
Bottom heating element 1000 W
Top heating element 800 W
Full oven (Top + Bottom) 1800 W
Grill 1650 W
ENGLISH 13