iHome ID28 - Manual (Page 6)

3
RESETRESET
TESTTEST
iD28 Quick Start
1:Stand 2:Power
Fold out the stand feet on the bottom of the unit, then
turn unit upright for operation.
Plug the AC adapter into the adapter jack on the rear of the
unit and the other end into a working outlet. The first time
you connect the unit you should let it charge the internal
battery completely (about 5 hours).The internal battery (and
docked iPhone/iPad/iPod) will charge.
3:iPhone/iPad/iPod
• Press on the iHome logo on front of the unit to release the
dock (press in for travel)
• Gently dock playing iPad/iPhone/iPod. The unit will turn on
and your audio will play through the unit.
• Press the or Buttons to adjust volume
• Press the EQ Button to cycle to Treble, Bass and SRS,
press or to adjust settings.
• Press the Button to turn unit off.
4:Time Sync
• Make sure unit is OFF and iPhone/iPad/iPhone
is docked
• Press and release the Clock Sync Button on
the top left of the unit. “SYNC” will flash in the
display, followed by 2 beeps indicating time
sync was successful.
• If “FAILED” appears on the display and a long
beep sounds, sync was unsuccessful. Try again
with a different iPhone/iPad/iPod, or set clock
manually (see page 7).
Press clock sync