iHome iH120 - Manual (Page 11)

8
During normal operation, press and hold the
Wake-to Button to set button click sound on or off. After the display shows
“CLC”, press
or Button to set click sound on or off, then wait around 5 seconds to exit the setting mode.
Sleep mode lets you sleep to your iPod, gradually lowering the volume until the unit shuts off at the selected time.
1. Press the
Sleep Button to enter sleep mode. The Sleep Icon will appear on the display to indicate the unit is in sleep
mode. The unit will automatically turn off after the selected time. Sleep mode has a Gentle Sleep feature which gradually
lowers the volume 15 seconds before auto power off.
2. You can adjust the sleep timer from 120, 90, 60, 30 or 15 minutes by pressing the
Sleep Button again.
3. When the display changes back to show the real time, press the
Sleep Button once to show the sleep time remaining.
Pressing it again will change the sleep time to the next lowest increment.
4. The iH120 has independent volume setting for sleep mode so you can adjust the sleeping volume without affecting the
alarm volume. Press the and
Button on main unit or remote control to adjust the sleep volume. The sleep volume
will remain at that level the next time you enter sleep mode until controls are changed.
5. To stop listening at any time, press the
Alarm Reset/Power On/Off Button on the iH120 or on the remote control to
turn it off.
Sleep Operation
Click Sound Operation