Infinity TSS 3-IN-1 - Manual

3/07
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impedance
8 Ohms
• Max Amp Power 125 Watts*
• Frequency Response 120Hz – 20kHz (±3dB)
• Sensitivity 89dB (2.83V @ 1 meter)
• Crossover Frequency 3,500Hz; 24dB/Octave
SYSTEM COMPONENTS:
• Grille
NT-80317-02 (Platinum)
NT-80317-01 (Charcoal)
• Low-Frequency Transducer 3-1/2" (89mm) MMD ® ,
magnetically shielded
(080F30004)
DC Resistance 7.8 Ohms, ±10%
• High-Frequency Transducer 3/4" (19mm) MMD,
magnetically shielded
(020D30901)
DC Resistance 3.2 Ohms, ±10%
• Crossover Network FL-80305-01MS (Platinum)
FL-80305-01MBS (Charcoal)
AURAL SWEEP TEST SPECIFICATIONS:
• System Aural Sweep Test
6.0V Input 120Hz to 20kHz
• L.F. Aural Sweep Test 5.0V Input 120Hz to 4kHz
• H.F. Aural Sweep Test 2.83V Input 3kHz to 20kHz
PHYSICAL SPECIFICATIONS:
• Dimensions
4-1/8" x 40-1/8" x 4-3/8"
(H x W x D) (105mm x 1019mm x 111mm)
• Weight 15.25 lb (6.9kg) Each
WARRANTY:
• Refer to Warranty Statement packed with each product.
* The maximum recommended amplifier power rating will ensure
proper system headroom to allow for occasional peaks. We do not
recommend sustained operation at these maximum power levels.
TSS 3-IN-1
28
27
27
29
13
12
25
10
27
27
26
27
21
17
6
27
Legend on Page 2
HIGH-FREQUENCY
TRANSDUCER
020D30901
LOW-FREQUENCY
TRANSDUCERS (2)
080F30004
CROSSOVER
NETWORK
FL-80305-01MS (Platinum)
FL-80305-01MBS (Charcoal)
PACKAGING
TSS 3-IN-1 WIRING DIAGRAM (x3)
Technical Manual
TSS 3-IN-1
L1
0.4mH
L2
0.18mH
C1
16μf
100v
C2
5.1μf
100v
R1
1.8 ohm
10w
.205
.205
.205
.110
.110
.110
140mm
140mm
140mm
140mm
120mm
120mm
Infinity Systems, 250 Crossways Park Drive, Woodbury, New York 11797
TSS 3-IN-1 SCHEMATIC (x3)