Typical product parameters – Invacare Compass SPT PH904A User Manual
Page 13
TYPICAL PRODUCT PARAMETERS
13
TYPICAL PRODUCT PARAMETERS
*NOTE: 18-inch x 18-inch seating, no footrests, no anti-tippers, in reverse configuration, with
22-inch wheels.
INVACARE COMPASS SPT
*OVERALL WIDTH:
27½ inches (seat width + 9½-inches)
*OVERALL DEPTH:
33 to 39 inches
OVERALL HEIGHT:
39½ inches (seat-to-floor + back cane height)
ANTI-TIPPERS:
Standard
FOOTREST:
Swing-Away Footrest
Lift-off Footrest (Optional)
Elevating Swing-Away Footrest (Optional)
Articulating Swing-Away Footrest (Optional)
ARMRESTS
DUAL POINT ARMS:
LOCKING CANTILEVER ARMS:
T-ARMS:
Desk or Full Length, Adjustable or Fixed Height
Desk or Full Length
Desk or Full Length, Adjustable Height
SEAT PAN:
Optional
BACK:
Fixed - 20 or 24 inches
BACK ANGLE ADJUSTMENT:
90° to 120° (10° increments)
REAR AXLE:
Quick-Release or Fixed
REAR WHEELS:
12, 20, 22, and 24-inch Composite
HANDRIMS:
Aluminum, Steel, Plastic Coated or Projections
CASTER SIZE:
8-inch w/ Precision Sealed Bearings
6 x 1-inch w/ Precision Sealed Bearings
6 x 2-inch w/ Precision Sealed Bearings
SEAT WIDTH:
4 to 22 inches
SEAT DEPTH:
15 to 22 inches
WHEEL LOCKS:
Push-to-Lock, Pull-to-Lock
TILT-IN-SPACE:
Dual Cable Trigger Mechanism
15 to 20-inch deep wheelchairs - 45° of Tilt
21 to 22-inch deep wheelchairs - 35° of Tilt
FRAME:
Steel
WEIGHT LIMITATION:
250 pounds