IBM MICROPORTABLE ILM300 - Manual (Page 20)

The projector is equipped with a self-locking, quick-release elevator foot and button. To raise the
projector:
1.
Press and hold the elevator button
1 .
2. Raise the projector to the height that you want, then release the button to lock the elevator foot 2
into position.
Using the projector keypad and remote control
On the projector keypad, at left below, and the remote control, at right below, use the Menu button to
display the on-screen menus. Use the Select button on the projector keypad or the Computer and Video
buttons on the remote, at right below, to choose between devices attached to the projector. See “Using the
on-screen menus” on page 12 for details.
Video
ON
OFF
Menu
Power
LASER
APERTURE
Computer
Laser
Effect
Volume
L R
!
*
Volume
Menu
Power
Lamp
Source/
Select
Keystone
Keypad or remote control
When you have more than one image source connected to the projector, select between them by
v pressing the Select button on the keypad
v pressing the Computer or Video button on the remote control
v using the SourceSearch feature in the on-screen menus to automatically detect the kind of source
attached. See ″SourceSearch on page 18.
Note: If the SourceSearch feature is not activated and you have multiple devices attached to the projector,
you might need to press the Select button more than once to find the active source. If you are
using the Select button, sources rotate in this order: data analog, data digital, S-video, and
composite video.
10 IBM iLM300 MicroPortable Projector: User’s Guide