IOGear GCS138 - Manual (Page 26)

Factory Default Settings
The factory default settings are as follows:
Setting Function
Restore Default Values
Clears all settings from memory, and returns the unit to
the factory defaults. You are asked to confirm before
the procedure goes on. Key in Y, then press [Enter] to
confirm. While the settings are being cleared, a
message appears on the display to indicate so. After
the settings have been cleared, another message
appears to indicate that the procedure completed
successfully.
OSD Activating Hotkey
Selects which Hotkey combination will activate the
OSD function: [Ctrl] [Ctrl] or [Scroll Lock] [Scroll Lock].
The default is the Ctrl key combination, but this may
conflict with programs running on the computers, in
which case, the Scroll Lock option should be selected
Set Password
Allows you to set a password in order to control access
to Locking/Unlocking the Console (see the OSD
Security Features section, below, for details).
Setting Default
Display Duration Always On
Display Mode The Port Number plus the Port Name
Scan Duration 5 Seconds
Function Keys
24
HotKey