Insignia NS-IPSD1 - Manual (Page 5)

3
Insignia NS-IPSD1 MP3 Speaker Dock
www.insigniaproducts.com
Installing the backup batteries
To install the backup batteries:
1 Open the backup battery compartment on the
bottom of your speaker dock.
2 Insert one CR2025 button cell battery noting the
positive (+) and negative (-) markings in the
compartment.
3 Replace the battery compartment cover.
Docking an iPod with your speaker dock
To dock an iPod with your speaker dock:
1 Locate the numbered iPod bracket that fits your
iPod.
Each included bracket has a number on it,
indicating which iPod model the bracket is
compatible with.
2 Press the iPod Docking Tray at the bottom-front
of your speaker dock. The tray will open.
All brackets will only fit onto the dock one way.
3 Insert the iPod docking bracket into the docking
tray.
4 Connect the iPod to the iPod bracket on the
speaker dock.
After the iPod is connected to the speaker dock,
the unit will play and charge the iPod.
Using your speaker dock
Playing your iPod on your speaker dock
To play your iPod on your speaker dock:
1 Connect your iPod to the speaker dock (see
“Docking an iPod with your speaker dock” on
page 3)
2 Press STANDBY/ON, to turn on the speaker
dock.
3 Press Source to change to iPod mode to begin
playing your iPod.
4 Press VOLUME + or - to adjust the volume.
5 You can also select the music you want to listen
to by doing the following:
• Press or to skip tracks forward or
back, or press and hold or to search
through individual tracks.
6 To turn the speaker dock off, press
STANDBY/ON.
Tuning the FM radio
To tune the FM radio:
1 Press SOURCE to switch to Radio mode.
2 Press TUNE or . The current frequency is
displayed.
3 Press TUNE or to tune the radio to a
higher or lower frequency.
- OR -
Press and hold TUNE or to
automatically search for strong stations.
4 When you find a station you want to listen to,
release the TUNE or button. The display
reverts to the current time.
To set and use FM radio presets:
1 Press SOURCE to switch to Radio mode.
2 Press TUNE or . The current frequency is
displayed.
3 Press TUNE or to tune the radio to a
higher or lower frequency.
- OR -
Press and hold TUNE or to
automatically search for strong stations.
4 When you find a station you want to preset,
press and hold SET for five seconds.
5 Press TUNE or to change the preset
number, then press SET to save it.
6 To tune to a preset station, press PRESET
repeatedly until you reach the preset station
you want.
Connecting an external audio source to your
speaker dock
To connect an external audio source to your
speaker dock:
1 Plug one end of a 3.5 mm cable (not included)
or a 3.5 mm to 3.5 mm cable (not included) into
the AUX (Auxiliary) Input jack on your speaker
doc, then press Source to select AUX to listen to
the external music source.
2 Plug the other end of the cable into the audio,
line, or headphone output on an MP3 player or
other audio source.
3 Turn your speaker dock on.
4 Remove any docked iPods from your speaker
dock.
5 Audio played from the MP3 player or other
external audio source will now be heard on your
speaker dock.
6 Adjust the volume to a comfortable level. If you
used the headphone output from the external
audio source, adjust the volume with the
source’s volume control.
Adjusting the volume
To adjust the volume:
• In any mode, press VOLUME -/+ to adjust the
volume (32 levels) up or down. The current
volume level is displayed.
Note
These batteries are for clock/alarm backup only, in
case of a power outage.
Backup battery
compartment
NS-IPSD1_09-0731_MAN_ENG_V1.book Page 3 Tuesday, October 13, 2009 7:15 AM