IBM E50 - Manual (Page 5)

English - 3
Français
Español
Deutsch
Italiano
English
Portuguese
Direct Access Buttons
Most of the adjustments you make to your monitor will be accessed through the OSD
described in the next section. The Contrast and Brightness features can also be accessed
directly from the front of your monitor.
1 With the menu off, press the or button on the front of your monitor.
The button accesses the Brightness feature. The button accesses the
Contrast feature.
2 Push the button to increase or the button to decrease the value of the
selection.
3 Press the EXIT button twice to exit the OSD.
EXIT EXIT MENU MENU
Your New Monitor
Front Panel
1 EXIT ( ) button
Closes the OSD. It is also used to return to the previous menu when using the OSD.
2 The / ( / ) buttons
These buttons allow you to select and adjust items using the OSD. When adjusting an
item using the OSD, the
button lowers the value of the selected function.
The button raises the value of the selected function. These buttons are also direct
access buttons for the Contrast and Brightness feature controls. (See the section
below on Direct Access Buttons.)
3 MENU ( ) button
Opens the OSD. It is also used to select a highlighted function, open a sub-menu, or
move between menus when using the OSD.
4 Power button
The power button turns the monitor on and off. The power indicator light glows green
during normal operation, see “Specifications” section.
EXIT EXIT MENU MENU MENU
1
2 3 4
4E50_2-3pPfm Page 3 Thursday, March 13, 2003 11:59 AM