IBM T86A - Manual (Page 19)

8
5. Insert the power cable and signal cables into the hole of the stand.
6. Attach the 4 screws.
7. Push down the cable cover and fasten it.
Caring for your Monitor
Be sure to turn off the power before you perform any maintenance on the
monitor. Clean your monitor as follows:
z
Gently wipe the covers and the screen with a soft cloth.
z
Remove finger marks and grease with a damp cloth and mild detergent;
do not use solvents or abrasives.
z
Never apply detergent or other liquid directly to the screen. Dampen the
cloth and then wipe.
z
Never use flammable cleaning material to clean your IBM monitor or any
other electrical apparatus.