IBM 10K0001 - Manual (Page 10)

v Windows 98, Windows 95 OSR2, Windows 2000, or Windows NT 4.0
operating system if you will be using the MPEG-2 software CD
v An available drive bay
v An available IDE connection
v 40 MB available hard disk space
v Audio adapter supporting 44.1 or 48 kHz sampling rate
v Optional stereo speakers
v AGP 2X video with overlay support
Before you begin
Before you install the DVD-ROM drive, read the information in this section on
handling precautions and on using the drive controls and connectors.
Handling precautions
Use the following handling precautions to protect your drive.
v Keep the DVD-ROM drive in the antistatic bag until you are ready to install
the drive. Limit your movement when installing; movement can cause static
electricity buildup.
v Handle the drive with care. Dropping or jarring the drive can damage the
components inside the drive housing.
v Do not force insertion of the IDE or power cables. Doing so might damage
the connector or the drive.
1-2 16X Max DVD-ROM Drive: User’s Guide