beautypg.com

Speaker setup – Integra DTR-7.2 User Manual

Page 33

background image

33

Speaker Setup

a. Bass Peak Level Limiter

On: Select to set the bass peak level. When “On” is selected, the
Peak Level setting appears below.

Off: Select to turn off the bass peak level limiting function.

1-4. Bass Peak Level
(Bass Peak Level Manager

*

) sub-menu

Setting the bass peak level is important to keep your subwoofer from
being damaged by preventing it from outputting over a set volume. If
your subwoofer has a built-in limiter, set this setting to “Off.”

Note:
If your system does not include a subwoofer, this setting will set the
bass peak level for your front speakers.

b. Peak Level
The current bass peak level is displayed. Press the cursor button to
output a test sound. Then press the cursor button (or turn the
Master Volume dial) to slowly raise the volume to the point where
the sound becomes distorted and then back it off until it returns to
normal. This is the proper setting for the bass peak level.
After setting the Peak Level at the Bass Peak Level sub-menu,
press the RETURN button. The values are set and the previous
screen appears.

Notes:

• The volume can be adjusted to either –

∞ or between –81 to +18

decibels in 1-decibel increments.

• Do not allow the distorted sound to be output from the

subwoofer for a long time for it may damage the subwoofer.

* Bass Peak Level Manager is a registered trademark of Lucasfilm Ltd.

Advanced Menu

1.Speaker Setup

1-4.Bass Peak Level

a.Bass Peak Level
Limiter :Off

Quit:|SETUP|

Advanced Menu

1.Speaker Setup

1-4.Bass Peak Level

a.Bass Peak Level
Limiter :On

b.Peak Level :+18dB

Press to set
Peak Level.

Quit:|SETUP|

Advanced Menu

1.Speaker Setup

1-4.Bass Peak Level

b.Peak Level :-27dB

1.Turn Volume up.
2.Press RETURN just
before sound is
distorted.

db