Integra DTR-7.2 - Manual (Page 10)

10
Remote controller
SEND/LEARN indicator
This indicator acts as a guide when commands are programmed into
or sent by the remote controller. It also warns the user when an error
is made or battery power is low.
ON/STDBY button [26]
ON: Turns on the DTR-7.2.
STDBY: Places the DTR-7.2 in the standby state.
Be aware that pressing the STDBY button only places the DTR-7.2
in standby and does not turn the power completely off.
SLEEP button [52]
Sets the sleep function.
The SLEEP button enables you to set the DTR-7.2 to turn off
automatically after a specified time period.
DIRECT MACRO button [68]
For executing and programming the Direct Macro function.
MODE buttons and indicators [56-59, 62-69]
For selecting the component to be operated by the remote controller.
When a MODE button is pressed, it will light green for 8 seconds.
The selected MODE button will also light whenever any other
operation button is pressed to tell you which mode the remote
controller is in.
RETURN button [27]
For entering the selected setting and returning to the previous menu.
CH , DISC button [49, 56-58, 62, 63]
When in the RCVR mode, for selecting a tuner preset channel.
For selecting the disc to be played back for components with disc
changers when in the DVD or CD modes.
CH SEL/TOP MENU button
CH SEL: For selecting the speaker for level adjustment when in the
RCVR mode. Used together with the LEVEL / buttons. [52]
TOP MENU: When in the DVD mode, for displaying the menu
screen(s) recorded on DVD media. [58]
Front panel facilities
HOME THEATER CONTROLLER
RC-461M
Return button [27]
Press to exit the Main menu level or go back one level up.
Memory button [49]
This button is used to assign the radio station that is currently tuned
in to a preset channel or delete a previously preset station.
FM Mode button [48]
If you are listening to an FM radio station in stereo and the sound
cuts out or there is a great deal of noise, switch from STEREO to
MONO. Each time this button is pressed, the AUTO indication turns
on and off, and the stereo mode changes from AUTO to MONO and
vice versa.
Listening Mode buttons [51]
Press these buttons to select a listening mode for the current input
source.
Stereo: Selects for normal stereo output.
Surround: Selects for the Dolby Pro Logic, Neo:6, Dolby Digital,
or DTS listening modes.
THX: Selects for the THX listening mode.
DSP / : Switches to the listening mode before or after the current
one.
Direct button [51]
The direct mode outputs the sound without sound adjustment or
filtration. In the direct mode, even if the Subwoofer setting of the
Speaker Config sub-menu is set to “Yes,” no sound is output from
the subwoofer and the left and right channels are output, as is, to the
left and right speakers. Even for multichannel input signals, the
sounds are not passed through the sound adjustment circuits.