Insignia NS-F20TV - Manual (Page 9)

9
Insignia NS-F20TV Television
www.insignia-products.com
Connecting using the AV output terminals
You can connect an audio system to the AV
output terminals on the back of the television to
enjoy a high-quality sound from the audio
system. You can also connect the AV output
terminals to a VCR to record a program.
To connect using the AV output terminals:
•
Connect the audio and video cables between
the Audio (L,R) and Video output terminals
on the television and the Audio (L,R) and
Video input terminals on the video
equipment.
Using your television
Turning the television on and off
Turning the television on
To turn the television on:
1 Insert the AC plug into an AC outlet.
If no picture appears and the Standby
indicator lights up, then the television is in
Standby mode.
2 Press the Power button on the television
or on the remote control and the television
turns on.
Turning the television off
To turn the television off:
1 Press the Power button on the television
or on the remote control and the television
turns off.
2 Unplug the power cord from the power outlet
if you do not intend to use your television for
an extended period of time.
Using the menus
This television has a menu system that appears
on the screen. This system makes it convenient
and fast to use features on the television. You
can also display the status of television features
while watching a program.
Warning
To prevent electric shock, do not use a (polarized)
plug with an extension cord receptacle or other
outlet unless the blades can be fully inserted.
Note
The AC plug supplied with the television is
polarized to help minimize the possibility of
electric shock. If the AC plug does not fit into a
nonpolarized AC outlet, do not file or cut the wide
blade. It is the user's responsibility to have an
electrician replace the obsolete outlet.
To Video output
To Audio
outputs
Y = Yellow (video)
W = White (audio L)
R = Red (audio R)
To
Video input
To
Audio inputs
To
Audio inputs
VCR for Recording Audio System
Note
The television can turn off automatically by using
the Sleep timer function (needs to be set in
advance).
If there is no input signal for 15 minutes, the
television can turn off automatically (only in TV
mode).
After you turn off the television, you should wait at
least five seconds to turn the television on again.
Main Menu Sub Menu
Picture Contrast
Brightness
Color
Tint
Sharpness
P.Lock Parental Lock
• Lock
• Ratings Locks
• MPAA Rating
• TV Rating
• Canada English
• Canada French
Change Password
Clock On Timer
Clock
DST
Auto Clock
Zone
Preset Auto Program
• Antenna
• Start
Ch Setup
• Ch No
• Skip
• Label*
• Dig Signal*
Extra Closed Caption
• CC Display
• CC Setting
• CC Type
• CC Mode*
• CC Customer*
Menu Language
Audio Language
Note
• Items marked with * do not appear in all
modes.
• Some menu items are grayed out and are not
selectable.