I-Data ReRouter User Manual
Page 66
Problem Determination
ida ReRouter
66
ROUT0611I:
Trace enabled [...]
Description:
Program trace is enabled.
Action:
Note:
Trace information is written to the
file. (see section 9.2: "Trace" for further information).
ROUT0612W: SWIDDEF file error [...]
Description:
The swiddef is either invalid or non-existing.
Action:
Re-install or update the ida ReRouter.
If problem persists then contact your point of purchase.
Note:
-
ROUT0613I:
Printer is not ready (IRQ on remote printer)
Description:
An IRQ message has been discovered in the
remote printer.
Action:
Check the remote printer to establish the IRQ
situation (paper jam, paper out, off-line?).
Note:
-
ROUT0614I:
Printer is ready (IRQ solved)
Description:
Information only.
Action:
-
Note:
-
ROUT0615E:
TCP/IP printer protocol error
Description:
A protocol error has occurred between the
ida ReRouter and the remote device.
Action:
Check the remote device and retry.
Note:
-
ROUT0616I:
Connection established to [...] port [...]
Description:
A connection has been established to the IP
address [...], port no. [...].
Action:
-
Note:
Information only.