Insignia NS-27RTV - Manual (Page 15)

14
NS-27RTV 27-inch Color TV
www.insignia-products.com
7 Press or to set the hour, then press .
Note if the hour is AM or PM and choose the
setting you want.
8 Press or to set the minutes and press
or to select DAILY, then press ENTER.
9 Press EXIT to return to the normal screen.
Enable or disable the ON/OFF TIMER function
To turn on or turn of the On/Off Timer:
1 Press MENU.
2 Press
or to select the OPTION menu.
3 Press or to select ON/OFF TIMER.
4 Press or to select ON or OFF.
ON: Timer setting is enabled.
OFF: Timer setting is disabled.
5 Press EXIT to return to the normal screen.
Setting the picture size
You can view 480i format programs in three
picture sizes—4:3, 16:9 and ZOOM.
You can change the picture size by pressing the
PICTURE SIZE button on the remote control.
4:3 picture size
To fill the screen, the top and bottom edges are
extended more widely, although the center of the
picture remains near the former ratio.
If receiving a 4:3 format program, the image is
displayed in its originally formatted proportion.
16:9 picture size
This image displays the size of standard 16:9
with black bars at the top and bottom.
If receiving a 4:3 format program, the image is
displayed with black bars at the top and bottom
and stretched wider.
ZOOM picture size (for 16:9 format programs)
The entire picture is uniformly enlarged—it is
stretched the same amount both wider and taller
(retains its original proportion). The right and left
edges of the picture may be hidden.
Adjusting the picture
To adjust the picture:
1 Press MENU, then press or to select the
PICTURE menu.
2 Press or to select the item you want to
adjust.
3 Press or to adjust the setting.
4 After modifying your desired setting, press
EXIT to return to normal screen.
Resetting your picture adjustment
The RESET function returns your picture quality
adjustments to the following factory settings:
1 Press MENU, then press or to select the
PICTURE menu.
2 Press or to select RESET, then press
.
Note
To cancel the OFF TIMER, press or to
select CLEAR after this step, then press
ENTER.
ZOOM
Note If a fixed black bar remains on the screen for
long periods of time, the image can become
permanently engrained in the screen and
cause subtle but permanent ghost images.
Never leave your television on for long
periods of time while it is displaying these
images.
Note The CONTRAST default setting is set to
maximum at the factory.
Item < >
BRIGHTNESS decrease increase
CONTRAST decrease increase
COLOR paler color brilliant color
TINT reddish tint greenish tint
SHARPNESS softer picture clearer picture
Item Value
BRIGHTNESS center (25)
CONTRAST max (50)
COLOR center (25)
TINT center (0)
SHARPNESS center (25)
Note When you press RESET in the PICTURE
menu, the picture adjustments return to the
factory preset levels.