Icom IC-V8000 - Manual (Page 4)

1 - 1
‘ ‘ GENERAL
• Frequency coverage :
*Specifications Guaranteed: 144–148 MHz only
• Type of emission : FM (F2D / F3E)
• Frequency stability : ± 10 ppm (–10˚C to +60˚C; +14˚F to +140˚F)
• Tuning steps : 5, 10, 12.5, 15, 20, 25, 30 or 50 kHz
• Antnna connector : SO-239 (50
Ω
)
• Power supply requirement : 13.8 V DC (Operable voltage range: 11.7 to 15.9 V)
(negative ground)
• Number of memory channel : 207 channels (including 6 scan edges and 1 call channel)
• Call channel : 1 channel
• Scanning mode : Full, Program, Priority, Memory, Channel, Skip, Tone, DTCS, Bank and WX
• Current drain (approx.) :
• Usable temperature range : –10˚C to +60˚C; +14˚F to +140˚F
• Dimensions (projections not included) : 150(W)
×
50(H)
×
150(D) mm; 5 29 ⁄ 32 (W)
×
1 31 ⁄ 32 (H)
×
5 29 ⁄ 32 (D) in.
• Weight : 1.09 kg; 12.3 oz.; 38.4 oz
‘ ‘ TRANSMITTER
• RF output power (at 13.8 V DC) : 75 W / 25 W / 10 W / 5 W (High / Middle High / Middle Low / Low)
• Modulation system : Variable reactance frequency modulation
• Maximum frequency deviation : Narrow: ±2.5 kHz*; Wide: ±5.0 kHz
• Spurious emissions : Less than –60 dB
• Microphone connector : 8-pins modular (600
Ω
)
‘ ‘ RECEIVER
• Receive system : Double conversion superheterodyne system
• Intermediate frequencies : 1st 21.7 MHz
2nd 450 kHz
• Sensitivity : 0.15 µV at 12 dB SINAD (typical)
• Squelch sensitivity : 0.08 µV at threshold (typical)
• Selectivity : Narrow; More than ±3.0 kHz at –6 dB, Less than ±9.0 kHz at –55 dB*
Wide; More than ±6.0 kHz at –6 dB, Less than ±14.0 kHz at –60 dB
• Spurious and image rejection : 60 dB (typical)
• Audio output power (at 7.2 V DC) : More than 2.0 W at 10% distortion with an 8
Ω
load
• Ext. speaker connector : 3-conductor 3.5(d) mm ( 1 ⁄ 8 ”)/8
Ω
*[USA] version only
All stated specifications are subject to change without notice or obligation.
Transmit
Receiving
SECTION 1 SPECIFICATIONS
Version
[USA]
[SEA]
[CSA]
Receive
136.000–174.000 MHz*
Transmit
144.000–148.000 MHz
140.000–150.000 MHz*
136.000–174.000 MHz*
15 A
9.0 A
6.0 A
5.0 A
1.0 A
0.8 A
High (75 W)
Middle High (25 W)
Middle Low (10 W)
Low (5 W)
Max. audio
Stand-by