Icom IC-V8 - Manual (Page 37)

28
7
DTMF MEMORY
■
Programming a DTMF code
The transceiver has 5 DTMF memory channels (d0 to d4) for
storage of often-used DTMF codes of up to 24 digits.
q Push [0•
DTMF
-
M
] after pushing [A•
FUNC
] to enter the DTMF
memory.
• One of “d0” to “d4” appears.
w Rotate [VOL] to select the desired
channel.
e Push [0•
DTMF
-
M
] for 1 sec. after
pushing [A•
FUNC
] to enter the
DTMF programming mode.
• “_ _ _ _ _” appears.
• Programmed memories can be
cleared in this way.
r Push the digit keys, [A•
FUNC
], [B•
CALL
], [C•
MR
], [D•
CLR
], [ ✱ •
OP
-
TION
] and [#•
ENT
] to enter the desired DTMF code.
• A maximum of 24 digits can be input.
• [
✱ •
OPTION
] enters as “E”, [#•
ENT
] enters as “F.”
• If a digit is mistakenly input, push [SQL] or [PTT] momentarily
then repeat from step q .
t Push [SQL] or [PTT] to input the digits and exit the DTMF pro-
gramming mode.
• Programmed DTMF codes sound when [SQL] is pushed to exit.
MR
MR