Ironman Fitness 350r - Manual (Page 5)

5
Getting Started - The Ironman 350r will require some assembly. Unpack the box in a clear
area. Remove packing material. Do not dispose of packing material until assembly is complete
and unit is working properly. Place the unit on a clean level surface for assembly. Make sure
there is easy access to an electrical outlet. Before assembling, the unit should be placed as
close as possible to its final location. If you are missing any parts, please call Ironman Fitness
at 1-888-340-0482. Tools have been provided to assist with product assembly.
Assembly
Figure 1
Step 1:
Remove the two hex head bolts from the
front stabilizer. Attach the front stabilizer
(2) onto the front of main frame (3) using
hex head screws (1), washers (4) and cap
nuts (5).
Step 2:
Remove the two hex head bolts from the
rear stabilizer. Attach the rear stabilizer
(8) onto the front of the main frame (3)
using carriage bolts (1a) and washers (4).