Lan control settings, Network state – InFocus IN5318 User Manual
Page 37
User’s Manual
Lan Control Settings
Press the ENTER/SELECT button to enter the Lan Control Settings sub menu.
I
TEM
D
ESCRIPTION
Press the
◄► buttons to select projector remote command control.
(Range: RS232/ RJ45)
Control By
Note: this setting changes the standby power:
RS232 <1W (Default)
RJ45 <9W
Network State
Press the ENTER/SELECT button to enter the Network State sub menu. See below.
Network State
I
TEM
D
ESCRIPTION
Network State
Displays the network connection status.
Press
◄► to turn DHCP On or Off.
DHCP
Note: If you select DHCP Off, complete the IP Address, Subnet Mask, Gateway, and
DNS fields.
Projector IP Ad-
dress
Enter a valid IP address if DHCP is turned off.
Subnet Mask
Enter a valid Subnet Mask if DHCP is turned off.
Default Gateway
Enter the default Gateway address on the network.
DNS
Enter a valid DNS name if DHCP is turned off.
– 30 –
Apply Press
(ENTER/SELECT) /
► to confirm settings.