InFocus IN5318 User Manual
Page 12
IN5316HD/IN5318 – User’s Manual
– 5 –
17.
USB
Connect the USB CABLE from a computer
(used for presentation slide control with the projector remote)
18.
DISPLAYPORT
Connect a DISPLAYPORT CABLE to a DISPLAYPORT source
19.
HDMI
Connect the HDMI CABLE from an HDMI device
20.
VGA2
Connect the RGB CABLE from a computer or a video enabled device
21.
RJ45
Connect a LAN CABLE for networking purposes
Solid Red
Normal operation
22.
READY LED
Flashing Red
Lamp is not ready
23.
TEMP LED
Solid Red
Overheating
Solid Red
Standby
Solid Green
Normal operation
24.
PWR LED
Flashing
Green or
Red
LED error messages
25.
POWER button
Turns the projector on or off (main power switch must
be turned on first).
26.
VGA1
Connect the RGB CABLE from a computer or a video enabled device
Note:
If your video equipment has various input sources, it is recommended to connect in priority of
HDMI, component, S-Video, Composite for better picture quality.
Warning:
As a safety precaution, disconnect all power to the projector and connecting devices before making
connections.