Intel ETX CD - Manual (Page 14)

3 Specifications
Kontron User's Guide ETX CD 14
3.2 Mechanical Specifications
3.2.1 Dimensions
➤ 95.0 mm x 114.0 mm
➤ Height approx. 12 mm (0.4”)
Note: The maximum height of electrical components on the bottom side of the module is specified with
2.0mm in the ETX@ specification. On the ETX@-CD the Southbridge is soldered on the bottom side
and Intel specified the ICH7 with 2.28mm ± 0.21mm
3.3 Electrical Specifications
3.3.1 Supply Voltage
➤ 5V DC +/- 5%
3.3.2 Supply Voltage Ripple
➤ Maximum 100 mV peak to peak 0 – 20 MHz
3.3.3 Supply Current 5 V_SB
➤ 0,10 A typical
3.3.4 Supply Current (typical, DOS prompt)
Power-consumption tests were executed during the DOS prompt and without a keyboard. Using a
keyboard takes an additional 100 mA.
All tested boards were fully equipped –AL boards. All boards were equipped with 1024 MB DDR2 SDRAM.
Modules were tested using maximum CPU frequency.
ETX®-CD Celeron M ULV 423
CPU Clock 1066 MHz
Mode Full On
Power Consumption 2,20 A
ETX®-CD Core 2 Duo Processor L7400
CPU Clock 2 x 1,5 GHz
Mode Full On
Power Consumption 3,59 A
ETX®-CD Core Duo Processor L2400
CPU Clock 2 x 1,66 GHz
Mode Full On
Power Consumption 2,96 A