IBM MDS 9506 - Manual (Page 6)

Cisco MDS 9506 for IBM System Storage at a glance
Physical characteristics 2
imensions D 31.11 cm H x 44.12 cm W x 55.25 cm D
(12.25 in x 17.37 in x 21.75 in)
ack height R 7U
epth including cable guide D 67.9 cm (26.75 in)
eight (fully configured W 56 kg (124 lb)
hassis) c
irector is rack mountable in a standard 19-inch EIA rack, meeting Cisco requirements D
efined in the recommended installation procedures. 3 d
Operating environment
Temperature 0° to 40° C (32° to 104° F)
Relative humidity 10% to 90%
Input 1900 W AC
100 to 240 V AC
50-60 Hz nominal
Output 1050 W at 100 to 100 V AC
1900 W at 200 VAC
For more information
Contact your IBM representative or
IBM Business Partner or visit
ibm.com/storage/cisco
© Copyright IBM Corporation 2007
IBM Systems and Technology Group
Route 100
Somers, New York 10589
Produced in the United States
October 2007
All Rights Reserved
IBM, the IBM logo, DS4000, DS6000, DS8000,
Enterprise Storage Server, FICON, Netfinity,
RS/6000, System p, System Storage,
System Storage Proven and TotalStorage are
trademarks or registered trademarks of
International Business Machines Corporation in
the United States, other countries or both.
Cisco and IOS are registered trademarks of
Cisco Systems, Inc. and/or its affiliates in the
U.S. and certain other countries.
Intel is a trademark of Intel Corporation in the
United States, other countries or both.
Linux is a trademark of Linus Torvalds in the
United States, other countries or both.
Microsoft, Windows and Windows NT are
trademarks of Microsoft Corporation in the
United States, other countries or both.
Java and Sun are trademarks of Sun
Microsystems, Inc. in the United States, other
countries or both.
Other company, product and service names
may be trademarks or service marks of others.
This document could include technical
inaccuracies or typographical errors. IBM may
make changes, improvements or alterations to
the products, programs and services described
in this document, including termination of such
products, programs and services, at any time
and without notice. Any statements regarding
IBM’s future direction and intent are subject to
change or withdrawal without notice, and
represent goals and objectives only. The
information contained in this document is
current as of the initial date of publication only
and is subject to change without notice.
IBM shall have no responsibility to update such
information.
IBM is not responsible for the performance or
interoperability of any non-IBM products
discussed herein. Performance data for IBM and
non-IBM products and services contained in this
document was derived under specific operating
and environmental conditions. The actual results
obtained by any party implementing such
products or services will depend on a large
number of factors specific to such party’s
operating environment and may vary
significantly. IBM makes no representation that
these results can be expected or obtained in
any implementation of any such products or
services.
THE INFORMATION IN THIS DOCUMENT IS
PROVIDED “AS-IS” WITHOUT ANY
WARRANTY, EITHER EXPRESSED OR
IMPLIED. IBM EXPRESSLY DISCLAIMS ANY
WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE OR
NON-INFRINGEMENT. IBM products are
warranted according to the terms and
conditions of the agreements (e.g.,
IBM Customer Agreement, Statement of Limited
Warranty, International Program License
Agreement, etc.) under which they are provided.
References in this document to IBM products,
programs or services does not imply that
IBM intends to make such products, programs
or services available in all countries in which
IBM operates or does business. Any reference
to an IBM program or product in this document
is not intended to state or imply that only that
program may be used. Any functionally
equivalent program or product that does not
infringe IBM’s intellectual property rights may be
used instead. It is the user’s responsibility to
evaluate and verify the operation of any non-
IBM product, program or service.
1 For the most current list of supported servers
and storage, please visit ibm.com/storage/
cisco.
2 For complete and current Cisco specifications,
please visit www.cisco.com/go/ibm/storage.
3 Because this switch is designed with side-
to-side airflow, Cisco recommends a minimum
air space of 16 cm (6 in) between walls and the
chassis air vents, and a minimum separation of
30.5 cm (12 in) between two chassis to prevent
overheating. IBM 2109-C36 SAN Cabinet meets
these requirements.
TSD00069-USEN-09
G225-6981-09