IBM Options 09N4153 - Manual (Page 21)

protect the media.
2. Reverse the procedure to enable writing on the media again.
Using single- and double-sided DVD-RAM media
DVD-RAM media is available in single-sided and double-sided versions.
2.6 GB and 4.7 GB versions are single-sided and are available in Type I or Type
II cartridges. 5.2 GB and 9.4 GB versions are double-sided and are available in
Type II cartridges. To access the data on both sides of the media, you must
remove the cartridge from the drive, turn it over, and re-insert it in the drive.
For convenience, double-sided cartridges are labeled side A and side B.
Removing the disc from the cartridge
DVD-RAM Type II discs may be removed from the cartridge for use in
DVD-ROM drives.
Removing the disc from the cartridge
Using the tip of a ball point pen, push and break the lock pin tab
1 . To
remove the disc, use a ball point pen to push down on the cartridge lid lock
2 and pull the cartridge lid 3 out to eject the disc. With the cartridge lid
Installation and user’s guide 1-13