beautypg.com

Connecting a computer, Using your tv, Turning your tv on and off – Insignia NS-LCD15-09 User Manual

Page 10: Selecting the tv signal source, Setting up the channel list, 8 fo

background image

8

Insignia NS-LCD15-09 15.6" LCDTV 720P

www.insignia-products.com

Connecting a computer

You can connect a computer using the HDMI or
VGA jack on the back of your TV.

To connect a computer using VGA:

1 Plug a VGA cable from your computer into

the VGA jack on the back of your TV.

2 Plug an audio cable from your computer’s

audio out jack into the AUDIO jack on the
back of your TV.

3 Plug in and turn on your TV.

4 Press INPUT repeatedly to select the VGA

input source.

To connect a computer using HDMI:

Plug an HDMI cable into the HDMI INPUT
jack on the back of your TV and into the
HDMI Out jack on the back of the computer.

Using your TV

Turning your TV on and off

To turn your TV on and off:

1 Make sure that the power cord is connected

to your TV and a power outlet.

2 Press

to turn on your TV. The power

indicator LED turns blue.

3 Press

again to return your TV to standby.

The power indicator LED turns red.

Selecting the TV signal source

To select the TV signal source:

With the TV on, press INPUT on either the
TV or the remote to choose from:

TV

Composite

S-Video

Component

VGA

HDMI

Setting up the channel list

After you select your TV source, if you selected
antenna or cable you need to set up the channel
list. When you set up your channel list, your TV
searches for all available channels in your area
and stores a list of these channels. When you
press CH – or CH +, your TV skips the channels
that do not have a signal.

Automatically setting up channels

To automatically set up the channel list:

1 Press MENU. The on-screen display menu

opens with Setup highlighted.

2 Press to enter the sub-menu, then press

or

to

highlight

Auto Ch Search.

3 Press ENTER or to start the search.

Manually adding or deleting channels from the
channel list

After you create a channel list using the Auto Ch
Search
option, you can manually add or delete
channels from the channel list.

To add or delete channels:

1 Press MENU. The on-screen display menu

opens with Setup highlighted.

2 Press to enter the sub-menu, then press

or

to

highlight

Manual Channel Set. The

Channel Setup Table opens.

3 Press

or

to select a channel, then

press ENTER to toggle between viewable
and not viewable.

4 Press MENU or EXIT to close the menu.

Warning

Make sure that you turn off and unplug your TV
before installing devices.

Note

When the computer goes into standby mode, your
TV turns off. If your TV does not turn on when you
“wake” your computer, press the POWER button
on your TV or remote control.

VGA

AUDIO

VGA cable

Audio cable

Note

HDMI, the HDMI logo, and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.

Note

You can press Exit to stop the search.

ENTER