Image IMTL315040 User Manual
Page 9
9
8. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may
be included. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking
belt (see page 24). To protect the floor or carpet, place a mat under the treadmill.
7. Remove the knob from the pin. Make sure that the collar
and the spring are on the pin as shown. Insert the pin
into the Latch Bracket (77), and tighten the knob back
onto the pin.
9
Knob
Pin
Collar
Spring
77
7
See also other documents in the category Image Sports and recreation:
- IMST90060 (12 pages)
- IMTL94106.2 (30 pages)
- IMBE39400 (22 pages)
- IMTL22990 (18 pages)
- IMTL11990 (30 pages)
- IMTL15991 (34 pages)
- IMTL19905 (38 pages)
- IMBE53901 (19 pages)
- IMBE53991 (18 pages)
- IMTL11995 (34 pages)
- IMTL39606.2 (26 pages)
- IMTL11905 (34 pages)
- IMTL07610 (34 pages)
- 831.159700 (18 pages)
- IMTL39105.1 (22 pages)
- IMTL22993 (19 pages)
- IMBE41990 (18 pages)
- IMTL12901 (34 pages)
- 4.8 (18 pages)
- IMTL07611 (34 pages)
- HGTL09110C (31 pages)
- IMBE53910 (23 pages)
- ICTL39522 (30 pages)
- IMHS20701 (20 pages)
- IMTL22506.0 (23 pages)
- IMTL12900 (34 pages)
- HGBE89910f (16 pages)
- IMTL39520 (30 pages)
- IMBE39401 (22 pages)
- IMEL2105.1 (20 pages)
- 16.0 Q treadmill IMTL4153.1 (30 pages)
- IMTL14901 (34 pages)
- IMTL11997 (30 pages)
- IMTL11901 (19 pages)
- IMTL59105.1 (30 pages)
- IMBE40890 (18 pages)
- 8.0 (32 pages)
- IMTL41205.0 (19 pages)
- IMTL11992 (30 pages)
- 10.8QL (34 pages)
- 831.299351 (34 pages)
- Q400 IMTL39906.0 (28 pages)
- ICTL39523 (30 pages)
- IMTL07800 (18 pages)