Maintaining your cds, Speciﬁ cations, Listening to an external audio source – Insignia NS-B4111 User Manual

Page 2

2 Close the CD door. After a few seconds, the display shows the total
number of tracks on the CD. If the disc is not correctly inserted or
defective, the display shows

To play the CD

Press PLAY/PAUSE. The current track number is
shown on the display.

To pause
playback

Press PLAY/PAUSE. The play indicator flashes on the
display. Press PLAY/PAUSE again to resume playback.

To stop playback

Press STOP. The display shows the total number of
tracks on the CD.

To skip tracks

Press

To repeat the
current track

Press REPEAT. To repeat the entire disc (continuous
play), press REPEAT twice. To return to normal
play, press REPEAT until “REPEAT” disappears from
the display.

To play tracks in
random order

Press STOP, press RANDOM, then press PLAY/PAUSE.
To stop random playback, press RANDOM again.

Listening to an external audio source

1 Connect the external audio device to the AUX IN jack on the
back panel of your CD player.
2 Slide the FUNCTION selector on your
CD player to AUX.
3 Start playing music from your external audio device.
Audio plays through your CD player’s speakers.

Maintaining your CDs

• Handle CDs only by their edges. Never allow your ﬁ ngers to
contact the reﬂ ective, unprinted side of the CD.

• Do not attach things such as adhesive tape and stickers to your

audio

CDs.

• Periodically clean your CDs with a soft, lint-free, dry cloth.
Never use detergents or adhesive cleaners to clean the disc. If
necessary, use a CD cleaning kit.

• If the CD skips or gets stuck on a section of the disc, it is
probably dirty or damaged (scratched).

• When cleaning CDs, wipe in straight lines from the center of
the CD to the outside edge. Never wipe in circular motions.

Speciﬁ cations

Power

AC: AC120V ~ 60Hz
Batteries: DC 12V (8 C batteries)

Radio frequency
coverage

FM: 87.5~108 MHz
AM (MW): 520~1730 KHz

GENERAL
CD PLAYER

Speaker: 8 ohms
Pick Up: 3-beam, semiconductor laser, 1-bit DA converter
Encoding: 8-time oversampling

Safety information

Warning: To reduce the risk of ﬁ re or electric shock, do not expose this appliance to
rain or moisture.
This apparatus shall not be exposed to dripping or splashing, and no objects ﬁ lled
with liquids, such as vases, shall be placed on the apparatus.

Speciﬁ cations

The lightning flash with
arrowhead symbol, within
an equilateral triangle , is
intended to alert the user to
the presence of unisulated
“dangerous voltage” within
the product’s enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to people.

WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

The exclamation point
within an equilateral
triangle is intended to alert
the user to the presence of
important operating and
maintenance (servicing)
instructions in the
literature accompanying
the appliance.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.
2 Keep

these

instructions.

3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with the
manufacturer’s

instructions.

8 Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including ampliﬁ ers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug does not ﬁ t into

your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories speciﬁ ed by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table
speciﬁ ed by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused for long periods of time.
14 Refer all servicing to qualiﬁ ed service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15 Grounding or Polarization - This product may be equipped with a polarized

alternating current line plug (a plug having one blade wider than the other).

This plug will ﬁ t into the power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try reversing the plug. If the

plug should still fail to ﬁ t, contact your electrician to replace your obsolete

outlet. Do not defeat the safety purpose of the polarized plug.

Alternate Warnings - This product is equipped with a three-wire grounding-type

plug, a plug having a third (grounding) pin. This plug will only ﬁ t into a

grounding-type power outlet. This is a safety feature. If you are unable to insert

the plug into the outlet, contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the grounding-type plug.

16 Ventilation - Slots and openings in the cabinet are provided for ventilation and

to ensure reliable operation of the product and to protect it from overheating,

and these openings must not be blocked or covered. The openings should never

be blocked by placing the product on a bed, sofa, rug, or other similar surface.

This product should not be placed in a built-in installation such as a bookcase or

rack unless proper ventilation is provided or the manufacturer’s instructions

have been adhered to.

17 The power plug is used as the disconnect device and should remain readily

accessible during the device’s intended use. To completely disconnect the device

from power, you should disconnect the power plug from the AC power outlet.

18 The battery should not be exposed to excessive heat, such as direct sunlight, ﬁ re,

or the like.

19 Cautions and other markings are located at the bottom of the apparatus.
20 The marking information is located at the bottom of apparatus.

Caution: The use of any controls, adjustments, or procedures other than those
speciﬁ ed herein may result in hazardous radiation exposure.

Legal notices

FCC Part 15

This device complies with Part 15 of the FCC Rules. Operation of this product is subject
to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that
may cause undesired operation.

This equipment has been tested and found to comply within the limits for a class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment oﬀ
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit diﬀ erent from that to which the
receiver is connected.

Consult the dealer or an experienced technician for help.

FCC warning

Changes or modiﬁ cations not expressly approved by the party responsible for
compliance with the FCC Rules could void the user’s authority to operate this
equipment.

Energy Star®

As an Energy Star Partner, Insignia has determined that his product or
product models meet the Energy Star guidelines for energy eﬃ

ciency.

Canada ICES-003 statement

This Class B digital apparatus complies with Canadian ICES-003.

90-day limited warranty

Visit www.insigniaproducts.com for details.

•

ENGLISH 09-0103

NS-B4111_09-0103_QSG_V2_EN.indd 2

3/4/2009 7:57:14 PM