IBM 48X-20X - Manual (Page 10)

2. Place or change the configuration jumper on the drive (and possibly make
changes to the configuration jumpers of other devices).
If you do not understand these procedures or are unsure about your ability to
perform all the procedures described, have a qualified computer technician
install the CD-ROM drive for you.
System requirements
Before you begin installing the drive, be sure your computer meets the
following system requirements.
v Minimum microprocessor: 80486
v Minimum RAM: 4 MB
v 5.25-inch diskette drive
v Available IDE connection
v Available internal power connection
v Available drive bay
v One of the following operating systems:
– Microsoft
®
Windows
®
95
– Microsoft Windows
®
98
– Microsoft
®
Windows NT
®
4.0
– Microsoft Windows 2000 Professional
– Microsoft Windows Millennium Edition (Me)
Handling instructions
To protect your device during installation, observe the following precautions:
v Handle the drive with care. Dropping or jarring the drive can damage the
components inside the drive housing.
v Keep the device in its antistatic bag until you are ready to install the drive in
your computer. Limit your movements. Movement can cause static electricity
buildup.
v Do not force insertion of the power cable. Doing so might damage the
connector or the drive.
1-2 48X-20X Internal IDE CD-ROM Drive: User’s Guide