Infinity TSS-FMK4000 - Manual (Page 3)

3 TSS-FMK4000
Step One
Remove both end caps of the speaker by unscrewing the single
center screws.
Step Two
Attach both of the end brackets to the speaker ends with the
1/4-20 x 3/4" flat-head machine screw, as shown.
End Bracket
End Bracket
1/4-20 x 3/4"
Flat-Head
Machine Screw
1/4-20 x 3/4"
Flat-Head Machine Screw
Speaker
End Cap
Center Screw
1/4-20 x 3/4" Screw
Important Notes :
1) In order to horizontally flush-mount the TSS-CENTER4000 in a wall
with standard 16" spacing between the studs, some modification to
that area of the wall will be necessary.This type of installation will
require a professional licensed contractor to install horizontal braces
that comply with the customer’s local building codes.
2) For a satellite installation, follow all the steps but cut the hole
in a vertical direction, perpendicular to the floor. See exploded view
on page 7.
INFP1614tss4000FMK-OM 10/29/04 11:39 AM Page 3