Front & rear panels —continued – Integra DPS-5.4 User Manual
Page 14
14
Front & Rear Panels—Continued
A
IR IN/OUT (21)
The IR IN connector can be used to connect a com-
mercially available IR receiver, which can be used
to pickup signals from the remote controller when
the DPS-5.4 is located in another room, installed in
a rack, or is out of range of the remote controller
The IR OUT connector can be used to connect a
commercially available IR emitter, which can be
used to pass remote controller signals received by
the IR IN along to other AV components.
B
OPTICAL DIGITAL AUDIO OUTPUT [19]
This optical digital audio output can be connected
to an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
C
COAXIAL DIGITAL AUDIO OUTPUT [19]
This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
D
jacks [20]
These
(Remote Interactive) connectors can be
connected to the
connectors on your other Inte-
gra/Onkyo AV components for interactive control.
For remote control operation, you must make an
analog RCA/phono connection between your DPS-
5.4 and the other AV component, even if they are
connected digitally.
E
ANALOG AUDIO OUTPUT [18]
These RCA/phono connectors can be connected to
the analog audio inputs on your TV, hi-fi amp, AV
receiver.
F
RS 232
This RS-232 port can be connected to an external
controller.
G
COMPONENT 2 VIDEO OUTPUT [19]
These BNC connectors can be used to connect
a TV or projector with BNC component video
inputs.
H
COMPONENT 1 VIDEO OUTPUT [19]
These RCA/phono connectors can be used to con-
nect a TV, projector or AV receiver with component
video inputs.
I
VIDEO OUTPUT [18]
These RCA/phono connectors can be used to con-
nect TVs, projectors or AV receivers with composite
video inputs.
J
S VIDEO OUTPUT [19]
These connectors can be used to connect TVs or
projectors with S-Video inputs.
K
AC INLET [22]
The supplied power cord is connected here. The
other of the power cord should be connected to a
suitable wall outlet.
Rear Panel
1 2
4
3
5
6
7
8
9J
K