IGo Direct 60 - Manual (Page 6)

6. If the Passkey is entered successfully on both
devices, the message BT Keyboard
Connected will appear on the Status tab. If
the keyboard does not show up as connected:
a. Press the < Left Fn > < Right Fn >
keys together on the keyboard again.
b. Or, power cycle the keyboard (close and
reopen), then press < Left Fn >
< Right Fn >.
c. Or, check that the Red LED on the
keyboard is not lit after a power cycle,
indicating a dead battery condition.
7. If the passkey is not entered correctly, the
connection will fail. In this case you will need to
repeat steps 2-5 from above.
NOTE: Please, make sure that the passkey is
entered on your mobile device first, press OK
and then follow with the passkey on the
keyboard. When finished, press the
key on the keyboard.
UNSECURE CONNECTIONS
1. If you chose an Unsecured connection by
selecting Off at the Options tab > Bluetooth
security option, connection is usually
established within a few seconds after pressing
<
Left Fn > < Right Fn >. If the
connection is not completed, press the
<
Left Fn > < Right Fn > keys together again.
Stowaway Ultra-Slim Owner’s Manual for Symbian Series 60
Page 6