Input setup, P.72, Advanced setup —continued – Integra DTR-7.7 User Manual
Page 72
72
Advanced Setup—Continued
This section explains items on the “Input Setup” menu.
Character Edit
With this setting, you can enter a custom name for each
input source and AM/FM radio preset. When the input
source or radio preset is selected, its name will appear on
the display.
To delete all the characters in a name:
In step 5, press the Left [
] button instead of the Right
[
] button.
Notes:
• When the multichannel input is selected, the same
name as for DVD is displayed.
• XM Radio presets cannot be named.
• This procedure can also be performed on the AV
receiver by using its [Setup] button, arrow buttons, and
[Enter] button.
Input Setup
1
Press the [Receiver] REMOTE
MODE button, followed by the
[Setup] button.
To name an AM or FM radio preset,
select that preset first.
2
Use the Up and Down [
]/[
]
buttons to select “4. Input Setup,”
and then press [Enter].
The Input Setup menu appears.
3
Use the Up and Down [
]/[
]
buttons to select “Character
Edit,” and then press [Enter].
The Character Edit menu appears.
4
Use the Up and Down [
]/[
]
buttons to select “Character Dis-
play,” and use the Left and Right
[
]/[
] buttons to select:
No (Default): The default name is
displayed.
Yes: The custom name is
displayed.
For radio presets, the frequency is dis-
played when No is selected.
4-1.Character Edit
---------VIDEO1---------
a.Character Display
:Yes
b.Character
:
Press to Edit
to Clear
5
Press the Down [
] button to
select “Character,” and then
press the Right [
] button to
open the character input screen.
6
Use the arrow [
]/[
]/[
]/[
]
buttons to select a character, and
then press [Enter].
Repeat this step to enter up to 10
characters.
If you enter a character by mistake:
Press the [Return] button to move the
cursor back one place.
To correct a character:
1. Press the [Enter] or [Return] button
repeatedly to select the character to
be corrected.
2. Use the Left and Right [
]/[
]
buttons to select the new character,
and then press [Enter].
If the name contains less than 10 char-
acters, select “Exit,” and then press
[Enter].
7
Press the [Setup] button.
Setup closes.
4-1.Character Edit
---------VIDEO1---------
b.Character
:
---+
|ABCDEFGHIJKLM|
|NOPQRSTUVWXYZ|
|abcdefghijklm|
|nopqrstuvwxyz|
|0123456789-.'|
|()+*/=,:;!?_ |
| [Exit]|
+-------------+