iHome iH 26 - Manual (Page 10)

9
Setting Up the iH26
Setting Clock Time
1. Press and hold the
¿Time Set Button for 2 seconds until the display flashes. Press the ´ Hour Set Button
until the current hour is displayed. Next, press the
¾ Sleep/Minute Set Button to set the current minute.
Remember to set the correct AM or PM (an icon to the left of the time display is the PM indicator; there is
no AM indicator).
2. Press the
¿Time Set Button again to confirm the clock setting. You should hear 2 beeps indicating the
clock time is set.
Setting Alarm Time
1. Press and hold the
ᕨ Alarm Set Button for 2 seconds until the display flashes. Press the ´ Hour Set
Button until the desired alarm hour is displayed. Next, press the ¾ Sleep/Minute Set Button to set the
desired alarm minute. Remember to set the correct AM or PM (an icon to the left of the time display is the
PM indicator; there is no AM indicator).
3. Press the
ᕨ Alarm Set Button again to exit the setting mode. You should hear 2 beeps indicating the alarm
time and wake to mode are set.
Note: Once you set the alarm time, the alarm will be automatically armed. The Alarm Icon will appear to indicate
the alarm is armed.
Note: Make sure to adjust volume level for comfortable wake up volume.