IOGear HomePlug to Ethernet Bridge GHPB42 - Manual (Page 46)

47
Topic 3: Assigning a Static IP Address
(Note: If you use DHCP-capable gateway/router, you
don’t need to assign any static IP addresses because
the gateway/router will automatically assign IP ad-
dresses to the computers on the network.)
Go to Star t>Settings>Control Panel>Network
Connections>Local Area Connection
Right click on Local Area Connection, then double
click on Properties, you will see a window similar
to this:
Select “Internet Protocol (TCP/IP)” and then click
on Properties.
Networking Basics