iHome ZN9 - Manual (Page 9)

ZN9 IB_0521_b.fh10 6/11/08 1:24 PM Page 9
Sound is distorted Volume level is set too high Decrease the volume
Sound source is distorted If the Zune original sound source (MP3) is old or of poor quality, distortion
and noise are easily noticed with high-power speakers. Try a different
audio source such as a music CD.
If you are using an external sound source, try reducing the output volume
on the device itself. Also try turning bass boost OFF.
7
Troubleshooting
Solution Symptom Possible Problem
Unit/adaptor gets warm
after extended play at
high volume This is normal Turn unit off for awhile or lower volume
The signal from the line out jack needs amplification. Use powered
speakers/monitors or other amplified audio device. Can't hear
headphones/speakers
attached to line out jack Line out jack is not meant for headphones.
Speakers need a power source
Lower EQ settings. EQ settings are too high. For example, if the
treble is too high, the 3D effect may not sound
as good
Custom snooze time not set
Alarm not working AM/PM indicator not set up correctly Adjust alarm time for desired AM or PM.
Wrong alarm icon set on clock display Make sure the alarm time you adjusted matches the alarm icon 1 or 2
that is shown on the clock display.
7-5-2 days setting is not correct 7 days is everday alarm, 5 days is Mon-Fri, and 2 days is Sat-Sun. See
page 3 for setting alarms.
Calendar is not set correctly for 5/2 days alarm See page 3 for setting Clock/Calendar Section.
Snooze time
is too long/short Press and hold Snooze button then turn set wheel to adjust