IOGear GCS614A - Manual (Page 16)

Operation
13
Auto Scan Mode
The Miniview Micro Audio’s Auto Scan feature automatically cycles through the four ports at
5 second intervals. This allows you to monitor the computer activity without having to switch
from port to port manually.
To start Auto Scan Mode:
1. Invoke Hotkey Mode (see p. 11)
To select an active port:
1. Invoke Hotkey Mode (see p. 11)
2. Press and release the appropriate Port ID number (1, 2, 3, or 4)
After you press the number, the KVM focus switches to the designated computer and you
automatically exit Hotkey Mode.