InSinkErator GN1100 - Manual (Page 14)

14
Care and Use
Seasonal Storage and Draining the Tank:
Any time you plan on being away from home for an extended period of time, unplug
the unit’s electrical cord and drain the unit if below freezing temperatures are expected.
To drain the unit, follow these steps:
Electric Shock Hazard. To prevent electrical shock, disconnect
power before servicing unit. Use only a properly grounded and
polarized electric outlet.
Disconnect electricity
Push hot water dispenser faucet lever and allow the water to flow until cool. Shut off
the dispenser water supply at the shutoff valve. Remove the drain cap located in the
center of the bottom of your dispenser tank and drain the water into an empty pail.
After emptying the tank, reinstall drain cap on to bottom of tank. When you put the unit
back into operation, be sure to refill tank with water before re-connecting the electrical
plug. Review Installation step 13.
Cleaning the Faucet and Tank:
Use only mild cleaners to clean the dispenser faucet and plastic components. Use of
cleaning agents containing acids, alkalines and organic solvents will result in
deterioration of plastic components.
Property Damage. To avoid water damage due to leakage, replace
any cut, loose or split tubing. Periodically inspect the unit for any
signs of leakage and immediately remove from service any unit
suspected of leaking,