beautypg.com

InSinkErator Model SST-FLTR User Manual

Model sst-fltr, Job specifications, Dimensions

background image

I N S T A N T H O T W A T E R D I S P E N S E R S

Submittal Sheet

Stainless Steel Tank dispenses filtered
near-boiling 200°F water instantly.


Form No. HWD 301-05H-19-12

The Emerson logo is a trademark and
a service mark of Emerson Electric Co.
In-Sink-Erator is a division of
Emerson Electric Co.

©IN-SINK-ERATOR Printed in USA

Job Specifications

Stainless Steel Tank with F-201 Filtration System*

Model SST-FLTR

DRAIN PLUG

ADJUSTABLE
THERMOSTAT

11"

6.125"

Dimensions

DEPTH IS 6.75"

Specifications

Capacity

Electrical

Thermostat

Insulation

Shipping Weight

gallon

tank

dispenses 60 cups of
200

º

F water per hour

120 volts A.C., 750
watts, 6.25 amp
heating element
with grounded
three (3) prong
plug

Snap-action,
adjustable from
160

º

F to 210

º

F

(factory pre-set
at 200

º

F)

Meets U.L. 94HF-1
flammability
specification

Recommended
Supply Pressure

30-125 psi

Approximately

4.2 lbs.

• F-201 Filtration System included for

fresher

tasting

water

• 35% more near-boiling water from larger

gallon stainless steel tank

• Easy to adjust temperature control

• Tool-free tank connections and dry start

protection to ease installation

• Provides 60 cups/hour of near-boiling water

• 3-Year We Come To You™ In-Home

Service

Warranty*

• 120 volts, 750 watts, 6.25 amps

• For use with In-Sink-Erator Series 1100 and

other dispenser models

(Not for use with Model Hot1)

* The complete In-Sink-Erator warranty is

included in the Installation, Care & Use Booklet
packed with each unit.

Sample Specification

Capacity: gallon tank dispenses 60 cups of

200°F water per hour

Electrical: 120 volts A.C., 750 watts, 6.25 amp

heating element with grounded three (3)
prong

plug

Thermostat: Snap action, adjustable from 160°F

to

210°F

(factory

pre-set at approximately 200°F)

Insulation: Meets U.L. 94HF-1 flammability

specification

Shipping Weight: Approximately 4.2 lbs.

Recommended Supply Pressure: 30-125 psi

To ensure optimum performance, maximum

distance between tank and dispenser head
should be 16" or less.

*Water dispenser sold separately

2

3

2

3