ID Tech 70 - Manual (Page 24)

Data Editing Command List
Enter Setup Mode /E/D/FJ Clear JX
Review Configuration JY
Exit Data Editing JZ
Delete Line JS
Data Editing JA
Enabled 1
Disabled 0
Unmatched Input JB
Do Not Send 0
Send 1
Code IDs JC
Enter JC and the default Code ID(s) from Code ID Definition
on page 29.
Set Length JD
Enter JDand two digits from the keyboard to indicate length.
Match String JE
Enter JE, one digit one digit for the start
position, and the string to match each character, followed by a TER> (maximum 60 characters).
Count JF
Type JF and enter two digits from the keyboard to indicate
the next end of field, each followed by a .
Search String JG
Enter JG and enter characters for the search criteria from the
keyboard or function character chart, each character follo wed by a
.
Add Field JJ
Enter JJ and sequentially the characters to be included in the
new field from the keyboard or function character chart, each followed
by a .
4 2 4 3
Send Field Sequence JK
Enter JK and the field ID characters, each followed by
in the order to be sent (use upper case alphabetic charac-
ters).
Add Delay JM
Enter JM and two digits, each followed by a from
the keyboard. Each unit equals 100 milliseconds. Examples
Examples
EXAMPLE ONE
76440057320712
Symbology Code 128
Desired Output: Divide the input data record into two fields with one
consisting of the first six digits and the second containing the remain-
ing data. The output should have a inserted after each field.
Formula ID h C 06 A SEND ACBC
Field List Field A 764400
Field B 57320712
Field C
Keystroke Sequence
Enter Data Editing Setup
/E/D/FJ
Enter Data Editing and Enable JA 1
Enter Track_ID and h (for Code 128) JC h
Enter Count and 06 JF 0 6
Enter Add Field and character JJ ^N
Enter Field Sequence and ACBC JKAC<
ENTER>BC
Enter Exit Setup JZ
Output Data 764400
57320712