Image HGTL09110O - Manual (Page 15)

15
HOW TO CONNECT YOUR CD PLAYER, VCR,
OR COMPUTER TO THE CABINET
To use iFIT.com CD’s, your portable CD player,
portable stereo, home stereo, or computer with CD
player must be connected to the cabinet. See pages 15
and 16 for connecting instructions. To use iFIT.com
videocassettes, your VCR must be connected to the
cabinet. See page 17. To use iFIT.com programs di-
rectly from our Web site, your home computer must
be connected to the cabinet. See page 16. Note: This
section describes how your equipment can be con-
nected to the jack on the connection panel inside
the cabinet. However, your equipment can be con-
nected to the lower jack in the cabinet or the jack
on the front of the treadmill in the same way.
HOW TO CONNECT YOUR PORTABLE CD PLAYER
Note: If your CD player has separate LINE OUT and
PHONES jacks, see instruction A below. If your CD
player has only one jack, see instruction B.
A. Plug one end of the audio cable into the jack on the
connection panel inside the cabinet. Plug the other
end of the cable into the LINE OUT jack on your CD
player. Plug your headphones into the PHONES jack.
B. Plug one end of the audio cable into the jack on the
connection panel inside the cabinet. Plug the other
end of the cable into a 3.5mm Y-adapter (available
at electronics stores). Plug the Y-adapter into the
PHONES jack on your CD player. Plug your head-
phones into the other side of the Y-adapter.
HOW TO CONNECT YOUR PORTABLE STEREO
Note: If your stereo has an RCA-type AUDIO OUT
jack, see instruction A below. If your stereo has a
3.5mm LINE OUT jack, see instruction B. If your
stereo has only a PHONES jack, see instruction C.
A. Plug one end of the audio cable into the jack on the
connection panel inside the cabinet. Plug the other
end of the cable into the included adapter. Plug the
adapter into an AUDIO OUT jack on your stereo.
B. Plug one end of the audio cable into the jack on the
connection panel inside the cabinet. Plug the other
end of the cable into the LINE OUT jack on your
stereo.
C. Plug one end of the audio cable into the jack on the
connection panel inside the cabinet. Plug the other
end of the cable into a 3.5mm Y-adapter (available
at electronics stores). Plug the Y-adapter into the
PHONES jack on your stereo. Plug your head-
phones into the other side of the Y-adapter.
LINE OUT
PHONES LINE OUT
PHONES
Audio
Cable
Connection
Panel on
Cabinet
Head-
phones
A
AUDIO OUT
RIGHT
LEFT
Audio
Cable
Adapter
A
LINE OUT
Audio
Cable
B
PHONES
Audio
Cable
C
PHONES
PHONES
Audio
Cable
3.5mm
Y-adapter
Headphones
B
3.5mm
Y-adapter
Headphones
Connection
Panel on
Cabinet
Connection
Panel on
Cabinet
Connection
Panel on
Cabinet
Connection
Panel on
Cabinet