Insignia NS-LCD37 - Manual (Page 13)

11
Insignia NS-LCD37 LCD TV
www.insignia-products.com
To navigate the menu:
1 With the television turned on, press the
MENU button. The main menu opens.
2 Press or to select a menu page.
3 Press OK or to enter that menu page.
4 Within the menu, use , , , or to
navigate through the options or adjust an
option. Press OK or to confirm a setting,
enter a sub-menu, or toggle the settings of
the selected menu item.
5 Press MENU to return to the previous level
menu, or press EXIT to exit the main menu
and return to your program.
Displaying the information banner
To display the information banner:
•
Press the INFO button to display the
information banner. The information banner
displays status information such as the
channel number and signal source.
Depending on the mode, different information
is displayed. In DTV mode, more information,
such as the channel number, channel name,
and signal resolution can be displayed.
Selecting the on-screen menu language
To select the menu language:
1 Press MENU.
2 Press or to select Setup menu, then
press OK or to access the submenu.
3 Press or to select Menu Language,
then press OK or to select the language.
4 Press EXIT to return to watching the
television.
Selecting the input signal source
To select the input signal source:
1 Press INPUT. The SOURCE INPUT menu
opens.
2 Press or to select the input source.
Options include:
• TV—Watch the TV signal.
• Composite-1 (or S-Video)—Watch the
signal from the AV INPUT 1 (or S-VIDEO)
terminals.
• Composite-2—Watch the signal from the
AV INPUT 2 terminals.
• Component-1—Watch the signal from
the COMPONENT INPUT 1 terminals.
• Component-2—Watch the signal from
the COMPONENT INPUT 2 terminals.
• VGA—Watch the signal from the VGA
jack.
• HDMI-1—Watch the signal from the
HDMI1 input jack.
• HDMI-2—Watch the signal from the
HDMI2 input jack.
3 Press OK or to select the input source.
4 Press EXIT to return to watching the
television.
Memorizing the channels
When you turn on the television for the first time,
you should perform an auto channel search to
set up the stations on your television.
Selecting the tuning band
Before your television can memorize the
available channels, you must specify the type of
signal source that is connected to the television,
such as antenna or cable.
To select the tuning band:
1 Press MENU.
2 Press or to select Setup menu, then
press OK or to access the submenu.
3 Press or to select Tuning Band, then
press OK or to select the tuning band.
Note
Menu items that are not selectable are grayed out.
Note
Be sure to select the TV source input before
completing this procedure.