Specifications – Integra DTR-8.2 User Manual

Page 88

D0111-3

Integra Division of
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 201-785-2600 Fax: 201-785-2650 http://www. integrahometheater.com

Integra Division of
ONKYO CORPORATION
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8111 Fax: 072-833-5222

SN 29343174B

Specifications

AMPLIFIER SECTION

Continuous Average Power output (FTC)

All channels:

110 watts per channel min. RMS at
8 ohms, 2 channels driven from 20
Hz to 20 kHz with no more than
0.08% total harmonic distortion.
145 watts min. RMS at 6 ohms, 2
channels driven from 1 kHz with
no more than 0.1% total harmonic
distortion.

Continuous Power output (DIN)

150 watts at 6 ohms

Maximum Power output (EIAJ)

180 watts at 6 ohms

Dynamic Power Output (Stereo)

× 280 watts at 3 ohms

× 220 watts at 4 ohms

× 140 watts at 8 ohms

Total Harmonic Distortion:

0.08% at rated power
0.08% at 1 Watt output

IM Distortion:

0.08% at rated power
0.08% at 1 Watt output

Damping Factor:

60 at 8 ohms

Input Sensitivity and Impedance

PHONO:

2.5 mV, 50 kohms

LINE (CD, TAPE, DVD,
VIDEO 1-5):

200 mV, 50 kohms

MULTICHANNEL INPUT
(FRONT L/C/R, SURROUND
L/R, SURROUND BACK L/R): 200 mV, 50 kohms
(SUBWOOFER):

36 mV, 50 kohms

COAXIAL 1, 2, 3 (DIGITAL):

0.5 Vp-p, 75 ohms

DVD, VIDEO 1, 2, 3, 4, 5:

1 Vp-p, 75 ohms
1 Vp-p, 75 ohms (Y)
0.28 Vp-p, 75 ohms (C)

COMPONENT VIDEO 1, 2:

1 Vp-p, 75 ohms (Y)
0.7 Vp-p, 75 ohms (P

, P

)

Output Level and Impedance

Rec out (TAPE, VIDEO 1, 2):

200 mV, 470 ohms

Pre out:

1 V, 470 ohms

ZONE 2 OUT:

100mV, 470 ohms

VIDEO (VIDEO 1, 2, MONITOR
OUT, ZONE 2 OUT):

1 Vp-p, 75 ohms
1 Vp-p, 75 ohms (Y)
0.28 p-p, 75 ohms (C)

COMPONENT VIDEO OUT:

1 Vp-p, 75 ohms (Y)
0.7 Vp-p, 75 ohms (P

, P

)

Phono Overload:

120 mV RMS at 1 kHz, 0.5% T.H.D.

Frequency Response:

5 Hz to 100 kHz : +1/–3 dB
(CD in Direct mode)

RIAA Deviation:

20 Hz to 20 kHz : ±0.8 dB

Tone Control

Bass:

±10 dB at 50 Hz

Treble:

±10 dB at 20,000 Hz

Signal-to-Noise Ratio (Stereo)

Phono:

80 dB (IHF A, 5 mV input)

CD/Tape:

110 dB (IHF A, 0.5 V input)

TUNER SECTION

FM
Tuning Range:

87.5 — 108.0 MHz (50 kHz steps)

Usable Sensitivity

Mono:

11.2 dBf, 1.0 µV (75 ohms IHF)
0.9 µV (75 ohms DIN)

Stereo:

17.2 dBf, 2.0 µV (75 ohms IHF)
23 µV (75 ohms DIN)

50 dB Quieting Sensitivity

Mono:

17.2 dBf, 2.0 µV (75 ohms)

Stereo:

37.2 dBf, 20 µV (75 ohms)

Capture Ratio:

2.0 dB

Image Rejection Ratio

40 dB

IF Rejection Ratio:

90 dB

Signal-to-Noise Ratio

Mono:

76 dB

Stereo:

70 dB

Alternate Channel Attenuation:

55 dB

Selectivity:

50 dB (DIN)

AM Suppression Ratio:

50 dB

Total Harmonic Distortion

Mono:

0.2%

Stereo:

0.3%

Frequency Response:

30 Hz — 15 kHz, ±1.0 dB

Stereo Separation:

45 dB at 1 kHz
30 dB at 100 Hz — 10 kHz

AM
Tuning Range:

530—1,710 kHz (10 kHz steps)

Usable Sensitivity:

30 µV

Image Rejection Ratio:

40 dB

IF Rejection Ratio:

40 dB

Signal-to-Noise Ratio:

40 dB

Total Harmonic Distortion:

0.7%

GENERAL

Power Supply:

AC 120 V, 60 Hz

Power Consumption:

7.8 A

Dimensions (W

× H × D):

17-1/8"

Ч 6-7/8" Ч 18-1/8"

Weight:

38.4 lbs.

REMOTE CONTROLLER

Transmitter:

Infrared

Signal range:

Approx. 5 meters, 16 ft.

Power supply:

Two “AA” batteries (1.5 V

× 2)

Specifications and features are subject to change without notice.