IOGear MINIVIEW GCS1762 - Manual (Page 18)

Manual Switching
1. Press and release a port selection switch to bring the KVM focus to the computer attached to its
corresponding port. The USB and Audio focus does not change; they stay on the port that they’re already
on.
2. Press and hold a port selection switch for more than 2 seconds to bring the KVM, USB, and Audio focus
to the computer attached to its corresponding port
3. Press and hold port selection switches 1 and 2 for more than two seconds to start Auto Scan Mode. Tip:
To stop Auto Scan mode, simply press any of the port selection switches on the KVM.
15
Hotkey Operation