Icom IC-910H - Manual (Page 32)

*This output level of a standard signal generator (SSG) is indicated as SSG’s open circuit.
5 - 14
SOFTWARE ADJUSTMENT (continued)
S-METER
(SUB BAND)
ADJUSTMENT
ITEM (3)
NOISE SQL
(MAIN BAND)
(SUB BAND)
ADJUSTMENT ADJUSTMENT CONDITION DISPLAY OPERATION
• Set an SSG as :
Frequency : 146.0200 MHz
Level : OFF
• Receiving
• Set an SSG as :
Frequency : 146.0200 MHz
Level : 3.2 µV* (–97 dBm)
Modulation : OFF
• Receiving
• Set an SSG as :
Frequency : 146.0200 MHz
Level : 32 µV* (–77 dBm)
• Receiving
• Connect an SSG to [VHF ANT] connector
and set as :
Frequency : 146.0200 MHz
Level : 0.063 µV* (–131 dBm)
Modulation : OFF
• Receiving
• Set an SSG as :
Frequency : 146.0200 MHz
Level : 0.2 µV* (–121 dBm)
• Receiving
• Set an SSG as :
Frequency : 146.0200 MHz
Level : 0.063 µV* (–131 dBm)
• Receiving
• Set an SSG as :
Frequency : 146.0200 MHz
Level : 0.2 µV* (–121 dBm)
• Receiving
• Set an SSG as :
Frequency : 146.0200 MHz
Level : 0.063 µV* (–131 dBm)
• Receiving
• Set an SSG as :
Frequency : 146.0200 MHz
Level : 0.2 µV* (–121 dBm)
• Receiving
• Set an SSG as :
Frequency : 146.0200 MHz
Level : 0.063 µV* (–131 dBm)
• Receiving
• Set an SSG as :
Frequency : 146.0200 MHz
Level : 0.2 µV* (–121 dBm)
• Receiving
10
11
12
1
2
3
4
5
6
7
8
Push [RIT] key to store the “S0” level
into memory, and to step next.
Push [RIT] key to store the “S9” level
into memory, and to step next.
Push [RIT] key to store the “S9+60”
level into memory. Then the display
change to the noise SQL adjust-
ment.
Push [RIT] key to store the noise
squelch thresh-hold level for FM
mode into memory, and to step next.
Push [RIT] key to store the noise
squelch tight level for FM mode into
memory, and to step next.
Push [RIT] key to store the noise
squelch thresh-hold level for FM nar-
row mode into memory, and to step
next.
Push [RIT] key to store the noise
squelch tight level for FM narrow
mode into memory, and to step next.
Push [RIT] key to store the noise
squelch thresh level for FM mode
into memory, and to step next.
Push [RIT] key to store the noise
squelch tight level for FM mode into
memory, and to step next.
Push [RIT] key to store the noise
squelch threshhold level for FM nar-
row mode into memory, and to step
next.
Push [RIT] key to store the noise
squelch tight level for FM narrow
mode into memory. Then the display
change to the AFC center adjust-
ment.
FM SUB
FM SUB
FM SUB
N FM SUB
FM SUB
FM SUB
FMN
FMN
FM
FM
N FM SUB