IBM PowerLook 2100XL - Manual (Page 4)

5. Power Up
a) Turn the scanner power switch on. When the Ready indicator is on, your scanner is ready to
use.
b) Turn on your computer
6. Software Installation
We recommend that you install your image editing software first and then MagicScan.
a)
Insert UMAX MagicScan CD into your CD-ROM drive.
b) Follow the on-screen instructions to completely install MagicScan.
Notes: If installation program does not show up automatically, please follow the procedure to
install:
Mac: Double-click “MagicScan installer” icon.
PC: Choose RUN from Start menu and type d:\setup (where “d” indicates CD-ROM
drive), then click OK.
If needed, after MagicScan installation, you could install binuscan PhotoPerfect.
4