IBM PowerLook 2100XL - Manual (Page 24)

Appendix B: Scanner Specifications
Scanner Type Flatbed
Interface
Built-in SCSI II, one 25-pin connector and one 50-pin connector
Scan Speed
10.8 ms/line (color mode)
Maximum Scanning Area
304.8 x 431.8mm (12” x 17”) for flatbed
304.8 x 431.8mm (12” x 17”) for UTA
Optical Resolution
800 dpi (H) x 1600 dpi (V)
Output (H/W) Resolution
800 dpi (H) x 1600 dpi (V)
Maximum Resolution
9600 dpi (H) x 9600 dpi (V)
Sample Depth
Color Mode 24 / 36 bits per pixel
Grayscale Mode 8 / 12 bits per pixel
Scanner Settings
Scaling 1% to 400%
Highlight / Shadow 1 ~ 255 steps/ 0 ~ 254 steps
Contrast / Brightness -100% ~ +100%
Gamma Curve Downloadable Curves, 14 bit depth
Data Output
Color Mode 24 bits / pixel, 42 bits / pixel (by BET*)
Grayscale Mode 8 bits / pixel, 14 bits / pixel (by BET*)
Power Requirements
Voltage 100 ~ 240 VAC
Frequency 50 / 60 Hz
Power Consumption Maximum 30 Watts
Environmental Range
Operating Temperature +5°C ~ +40°C
Relative Humidity 25% ~ 85%
Other Specifications
Noise Under 55 dB (Operating)
Dimensions 626 mm x 473 mm x 166mm
Net Weight 17Kgs for scanner
Systems Supported PC and Power Macintosh computers
Options UMAX Transparency Adapter UTA-2100XL
Note: Specifications are subject to change without prior notice.
*Bit Enhancement Technology
24