IOGear GCS1772 - Manual (Page 30)

Ethernet Switch
28
As you can see from the picture, your Cable/DSL line
connects to your router’s WAN port; network cable
from
any of the router’s LAN ports connect to any of
the KVM’s Ethernet ports; and network cable from
KVM’s Ethernet port connects to the Ethernet card
on your computer.
Connect Computers:
1. Connect CAT 5 cable coming from your Cable/
DSL router to any of the Ethernet ports on the
KVM
Tip: By doing this, the computers in your KVM
setup will “join” your existing Ethernet network
2. Connect network cable to Ethernet port on KVM
switch and the other end to the computer’s
Ethernet card
3. That’s all!