IOGear GCS1772 - Manual (Page 23)

21
Change Hotkey Mode Invocation Keys
In case the default Hotkey Mode invocation keys
(
Num Lock and Minus [-]) are not optimal in your
setup, you may change them to Ctrl and F12 ,
respectively.
To switch to an alternate Hotkey Mode invocation, do
the following:
1. Invoke Hotkey Mode
2. Press and release H
3. This will change the Hotkey Mode invocation
key to Ctrl and F12 (instead of Num Lock and
Minus).
Note: This procedure is a toggle between the two
methods. To revert back to the original HSM invocation
keys, repeat the above procedure again.
Change Port Switching Keys
The port switching activation keys can be changed
from tapping Scroll Lock key twice ([Scroll Lock] [Scroll
Lock]) to tapping Ctrl twice [Ctrl] [Ctrl].
To change the port switching activation keys, do the
following:
1. Invoke Hotkey Mode
2. Press and release T
3. The new port switching key will be [Ctrl], [Ctrl]
Note: This procedure is a toggle between the two
methods. To revert back to the original port switching
keys, repeat the above procedure.
Hotkey Operation