Mercedes-Benz 2004 E 55 AMG - Manual (Page 368)

367
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
1 Bulb socket for turn signal lamp
2 High beam halogen bulb
3 Bulb socket for parking and standing
lamp
4 Cover for Bi-Xenon* (low beam and
high beam) or halogen (low beam)
headlamp
Bi-Xenon* headlamps Low beam halogen bulb
̈ Switch off the lights.
̈ Open the hood ( ୴ page 283).
̈ Turn the locking mechanism counter-
clockwise and remove headlamp
cover 4.
̈ Pull electrical connector off.
̈ Release the retaining springs and take
out the bulb.
̈ Insert the new bulb in the socket so
that the base is in the recess on the
lower left.
̈ Attach the retaining springs.
̈ Insert connector into the bulb.
̈ Align headlamp cover and click into
place.
Warning!
G
Do not remove the cover 4 for the Bi-Xe-
non headlamp. Because of high voltage in
Xenon lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
We recommend that you have such work
done by a qualified technician.