Maxtor STM3160215AS - Manual (Page 15)

DiamondMax 21 Serial ATA Product Manual, Rev. C 9
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
Non-Operational Shock 350 Gs max at 2 msec
Vibration, operating 5–22 Hz: 0.25 Gs, Limited displacement
22–350 Hz: 0.50 Gs
350–500 Hz:: 0.25 Gs
Vibration, nonoperating 5–22 Hz: 0.25 Gs, Limited displacement
22–350 Hz: 5.0 Gs
350–500 Hz:: 1.0 Gs
Drive acoustics, sound power
Idle** 2.7 bels (typical)
2.9 bels (max)
2.5 bels (typical)
2.9 bels (max)
2.6 bels (typical)
2.7 bels (max)
Performance seek 3.4 bels (typical)
3.6 bels (max)
3.0 bels (typical)
3.2 bels (max)
Quiet seek 2.7 bels (typical)
2.8 bels (max)
Nonrecoverable read errors 1 per 10 14 bits read
Annualized Failure Rate (AFR) 0.34%
Warranty 3 years on distribution units.
Contact start-stop cycles 50,000 at 25°C, 50% rel. humidity
Supports Hotplug operation per the
Serial ATA Revision 2.5 specification
Yes
Drive specification STM3250824AS STM3250820AS STM3250310AS